background image

1. General Description

The IPW-1A and CommuniCenter software combine to create a network door entry intercom 
system.  The IPW-1A is compatible with any of the Aiphone IE/IF door stations.  The system allows 
for call-in to the PC via the CommuniCenter software, general communication between the PC and 
the door station, as well as the ability to activate the electric door release. 

2. Features

The IPW-1A can be distributed over a data communication network.

The IPW-1A can be connected to an existing local area network (LAN) or wide-area network 
(WAN).  The system will operate over wired, wireless, and fiber-optic TCP/IP networks.

The CommuniCenter software allows for standard operation and maintenance of the system.

Digital audio recording and playback capability.

The CommuniCenter software allows for control of electric locks via the “Form C” dry contact on 
the IPW-1A.

3. Specifications

Input Voltage: 

Use Aiphone PT-1211C (included);  15-24V AC/DC

Network Interface:

10/100 Base-T Ethernet (Auto detection) RJ-45

IP Assignment: 

Static or Dynamic

Hardware Protocols:

TCP/IP, UDP, DHCP, SNMP, AutoIP, SonicIP, Ipzator

Contact Aiphone for additional supported protocols

Transport Bandwidth:

≈128Kbps per active session (normal mode)
≈64Kbps per active session (low bandwidth mode)

Audio Encoding:

PCM (raw), G.7II ( Law)

Audio Sampling:

16bit at 8kHz (normal mode)

8bit at 8kHz (low bandwidth mode)

Output Level: 

Determined by sub station

Relay Contact Rating:

30V AC/DC 1.0A (resistive)

Operating temperature:  32°F to 104°F (0°C to 40°C) 

Dimensions:

1-1/2

″H x 4-1/4″W x 4-15/16″D

Software System Requirements:

For optimum performance of the CommuniCenter program, we recommend the following 

minimum requirements:

Operating System:

Microsoft Windows  XP (SP2), Windows Vista

Processor:

1 GHz or faster

Memory:

256MB of RAM

Hard drive:

50MB of available disk space

Sound Card:

Windows supported sound card (w/ speaker & microphone)

Note:

Windows is the registered trademark of Microsoft Corporation in the United Sates and other countries.

®

®

Pg. 3

Summary of Contents for CommunCenter

























Reviews: