AIMIX MD-16E Reference Manual Download Page 11 | Manualshive

Page: 11 / 64

AIMIX MD-16E Reference Manual Download Page 11

- 1 -

UG-MD16E-EN (V1.3-190708)

MD-16E

Mixer Reference manual

Chapter 1

MD-16E

Quick Start

Notice

:

This manual is applicable to

MD-16E

digital mixer of firmware version 1.3. The old

version is unable to support the full functions below, partial functions may have some difference.
Firmware of higher version may have the manual of corresponding new version, please acquire

the latest information in time via

website.

1.1. Registration and upgrade

Before using

MD-16E

digital mixer, please take some minutes to visit website

and

register your

MD-16E mixer

. After completing registration, you can:

You can also obtain the related application knowledge and technique, find

out video and other tools to help you easily and pleasantly use the

MD -16E

digital

mixer.

1.2. About the MD-16E mixer

MD-16E

digital mixer provides you with professional, gliding and perfect performance. The simple and

powerful PRESET&SCENES function can easily save or recall optimized parameter configurations. From
now on, you can experience the professional tuning fun easily and contentedly.

Scan to follow WeChat public number

￭

Download the latest available firmware version of

MD -16E

, install The latest

functions for your mixer , or optimize and upgrade the performance.

￭

Timely receive the latest update notice.

￭

Obtain the relevant member favorable convenience, understand about the latest

product pulse and the support you will probably obtain.

audio signals, including the top low distortion pre-amplifiers, professional-grade digital to analog

/

digital

converter at input and output ends.

Professional field tuners often require four-band

parametric frequency equalization ( PEQ ) , high-pass filter
( HPF ), compressor ( COMP ) and noise gate ( GATE ) on
each input. They often use more high-quality digital effect
processors at the same time. On the output channel, they
also need to conduct equalization, compressing and
time-delay operation, and also use the DCA and MUTE
grouping functions.

On the whole signal chain, the professional audio

engineer has an endless pursuance for high quality of

«
...
9
10
11
12
13
...
»

Summary of Contents for MD-16E

































































Reviews:

No comments