7
• Damaged safety equipment and parts should be properly
repaired or replaced by trained and qualified personnel
unless otherwise indicated in the operating instructions.
• Stop using the tool immediately if it starts operating
abnormally or fails. Continuing the operation could cause
smoke, fire, shock, or injury. Always stop tool operation in the
following cases:
– UBX or battery pack is exceptionally hot.
– UBX or battery pack has deep scratches or deformation.
– You smell a burning smell.
– You feel a tingling shock.
• Do not use power tools with defective switches. A tool that
cannot be shut off is dangerous and must be repaired.
2. Do not charge UBX in the presence of lacquer, paint,
benzine, thinner, gasoline, gas, adhesives, or in any explosive
environment.
• Power tools can generate sparks which can ignite the dust of
vapors.
3.
To avoid risk of fire, do not do the following actions:
• Do not charge the battery on or near paper products like
cardboard, cloth products, or vinyl.
• Do not cover vent hole of charger while charging battery
pack. Do not tuck metal products or combustible materials
into vent holes.
• Do not charge battery pack in the presence of a dusty
place with cotton waste.
4.
To avoid the risk of smoke, fire, or explosion, keep foreign matter
like metal fragments or water away from the charging terminals
of the battery charger.
5. Do not use charger for unintended purposes.
6. Stop battery charging immediately if you notice abnormalities
like excessive heat. Disconnect the plug from the power outlet.
There is a risk of smoke, fire, or explosion if charging continues.
7. Avoid electric shock – do not touch power plug with wet hands.
Summary of Contents for UBX-T Series
Page 22: ...7 UBX EXPLODED VIEW ...
