8
2. GENERAL INFORMATION
2.1 IMPORTANCE OF OPERATING INSTRUCTIONS
This information was written with the intention of being read,
understood and complied with in all points by persons responsible
for the operation of the AIMCO tool.
Prior to start-up, please read the operating instructions and
comply with the safety instructions. Work station faults can only
be prevented if the contents of these operating instructions are
known and fault-free operation can be ensured.
We are not liable for damages and operational errors that
result from non-compliance with these operating instructions. If
difficulties arise, please contact us and we will gladly provide
assistance.
Contents of this handbook is subject to change without notice.
2.2 PROPER INTENDED USE
The tool may only be used, as described in these instructions, to
create fastener joints suitable for the type of tool.
Any other use beyond this is not considered proper intended
use. AIMCO is
not
liable for any damages resulting from non-
compliance.
2.3 GUARANTEE AND LIABILITY
NEW TOOL AND ACCESSORY WARRANTY
Any new tool or accessory branded with the AIMCO, Uryu, AcraDyne
or Eagle Industries name, and purchased from AIMCO, or through
one of its authorized distributors or agents, is warranted to the original
buyer against defects in materials and workmanship for a period of
one (1) year* from date of delivery. Under the terms of this warranty,
AIMCO will repair or replace any product or accessory warranted
hereunder and returned freight prepaid proving to AIMCO’s satisfac-
tion to be defective as a result of workmanship or materials. In order
to qualify for this warranty, written notice to AIMCO must be given
immediately upon discovery of such defect, at which time AIMCO
will issue an authorization to return the tool. The defective item must
be promptly returned to an authorized AIMCO service center with all
freight charges prepaid.
Summary of Contents for UBX-T Series
Page 22: ...7 UBX EXPLODED VIEW ...
