12
5. TOOL OPERATION
Trigger
Reverse
Lever
1. Set reverse lever to
R
for RIGHT or
L
for LEFT.
2. Squeeze Trigger
•
Speed increases in 3 steps as you squeeze trigger (both right
and left).
•
Release finger from trigger, and UBX will brake to stop the
operation.
3. Perform fastening
• Keep trigger squeezed until UBX automatically stops.
– The fastening will result in under torque NOK if premature
trigger off brakes to stop UBX.
– Do not cover exhaust hole because doing so will turn up
exhaust temperature to a dangerous level.
Exhaust
Hole
Keep squeezing until
automatic stop
Shut-Off Information LED
Model
Battery Pack
Fastening Condition
Approx. Number of Fasteners
that can be Fastened during
a Single Charge
UBX-T70
EYFB42
14.4V, 4.2Ah
UFT-16 (M12) hard joint
Fastening torque 40Nm for
0.4 sec. per fastener
600
EYFB42
14.4V, 2.0Ah
250
Fastener number is before factoring in fastening time elongation caused by heat.
Actual fastener number depends upon working conditions.
5.1 STARTING THE TOOL
Summary of Contents for UBX-T Series
Page 22: ...7 UBX EXPLODED VIEW ...
