9
This unit is designed to operate semi
automatically. Once the settings are
complete, the user merely selects Done,
the system will cycle to the Main Screen
and the user can start taking readings.
The readings will clear (or be cleared by
the user) and be stored in a set. Once all
readings in the set are stored, the unit will
process the readings, providing the user
with High, Low, Average, Standard Devia-
tion and percentage of Six Sigma.
OPERATING INSTRUCTIONS
Using the Auditor™ Torque Data Analyzer (ATDA-8000)
1.
Plug the 100 – 240 VAC Charger into DC Power Supply port.
2.
Plug the Charger into a 100 – 240 VAC power outlet using the appropriate plug end.
3.
Prior to turning unit on
, connect the transducer to an
Auditor™
supplied cable
(
ICBL-8000DIG
) via any open USB port on the ATDA-8000.
4.
To turn the ATDA 8000 on/off, press the “
ON/OFF
” button
(Figure 1).
5.
The Charging Mode Indicator will illuminate as you are charging and show status.
6.
The ATDA must be used with the power supply / charger and transducer
connected. Due to the power demands of the transducers and peripherals the
system should always be used with AC power supply connected.
Basic Navigation and Use of the Keypad
The functions of the Auditor™ ATDA 8000 can be accessed by using the button
associated with the text on the display screen.
Main Screen/Menu
