7
BASIC FUNCTIONS
The ATDA-8000 has three screens: Main Screen, Results Screen, and Settings Screen.
Prior to using the instrument you should enter the
SETTINGS SCREEN
and program the
operation of the instrument.
Settings Screen/Menu
The following are your screen selection choices in the
SETTINGS SCREEN
:
Sample Auto Clear
Timer to either auto clear samples or auto
save samples. If left
Off
, the user will be
required to manually clear the readings
by pressing the
Enter
button on the Main
screen.
Results Auto Clear
Timer to either auto clear complete
sample set or auto save complete sample
set. If left
Off
, the user will be required to
manually clear the readings by pressing
the
Clear Test Run
button at the bottom
of the display in the Main screen.
Samples per set
Sets number of samples to be taken per
audit. Choose how many torque samples
per test by pressing the
+ or –
buttons.
You may choose a maximum of 18.
Target
Sets Target/Nominal torque setting. After
entering the values press
Save
to store
them.
Low/High Limit
Sets limits either in percentage of target
or in specific numeric limits. Limits can
be enabled or left off. If they are
OFF
, turn
them on by pressing the
OFF
box and the
box will change to %. By pressing the
space to the left of the % symbol, the
number pad will pop up allowing user to
