Aimco AAP1B66400A, Operation Manual

Page: 4 / 12

Environmental
• Operating Temperature: 0°C to 32°C
• Storage Temperature: 0°C to 65°C
• Humidity:
— 5% to 90% RH, Non-Condensing, for temperatures
0°C to 40°C
— 5% to 60% RH, Non-Condensing, for temperatures
0°C to 65°C
• Maximum Altitude of Operation: 3000m
Specifications
AAP1B High Torque Series Tools
Torque Speed Weight Square Dr. Air Consumption
Model (NM) (FT-LB) (RPM) (LB) (IN) (CFM)
AAP1B66400A 400 300 57 9.75 3/4 22.9
AAP1B66600A 600 450 39 9.75 3/4 22.9
AAP1B66850A 850 625 27 9.75 3/4 22.9
AAP1B76950A 950 700 31 10.4 3/4 26.3
AAP1B771350A 1,350 1,000 22 10.4 1 26.3
AAP1B772000A 2,000 1,475 14 12.7 1 26.3
AAP1B772950A 2,950 2,175 9 14.9 1 26.3
AAP1B885100A 5,100 3,775 8 23 1-1/2 31.5
AAP2B High Torque, High Speed Series Tools
Torque Speed Weight Length Square Dr.
Model* (NM) (FT-LB) (RPM) (LB) (KG) (IN) (MM) (IN)
AAP2B76250A(R) 250 185 660 A = 10.5 AR = 12.3 A = 4.8 AR = 5.6 A = 10 AR = 12.5 A = 255 AR = 317 3/4
AAP2B76450A(R) 450 330 335 A = 10.5 AR = 12.3 A = 4.8 AR = 5.6 A = 10 AR = 12.5 A = 255 AR = 317 3/4
AAP2B76650A(R) 650 480 223 A = 10.5 AR = 12.3 A = 4.8 AR = 5.6 A = 10 AR = 12.5 A = 255 AR = 317 3/4
AAP2B76950A(R) 950 700 153 A = 10.5 AR = 12.3 A = 4.8 AR = 5.6 A = 10 AR = 12.5 A = 255 AR = 317 3/4
AAP2B771400A(R) 1,400 1,000 110 A = 14.6 AR = 16.4 A = 6.6 AR = 7.4 A = 10 AR = 12.6 A = 255 AR = 319 1
AAP2B772000A(R) 2,000 1,475 63 A = 14.8 AR = 16.6 A = 6.7 AR = 7.5 A = 11.2 AR = 13.6 A = 284 AR = 346 1
AAP2B773000A(R) 3,000 2,210 52 A = 15.0 AR = 16.8 A = 6.8 AR = 7.6 A = 11.6 AR = 14.0 A = 293 AR = 356 1
AAP2B785100A(R) 4,800 3,540 26.5 A = 19.7 AR = 21.5 A = 8.9 AR = 9.7 A = 13.3 AR = 15.8 A = 338 AR = 400 1.5
* R = Reversible
AAP1B66600A AAP1B772000A AAP1B772950A AAP1B885100A AAP2B771400A AAP2B772000A AAP2B773000AR
Physical
Sound and Vibration Emissions
• Sound Pressure Level: 82 dB(A)
• Sound Pressure Level: 93 dB(A)
• Sound Level uncertainty: 3 dB(A)
• Vibration Value: <2 5m/s2
• Vibration Level Uncertainty: 0 7 m/s2
Sound and vibration emissions for the AAP1B Series tested per
ISO 15744 and ISO 28927-2
Air Supply
• Air Hose Size: ½” ID X 3 Meters in Length
• Air Pressure: 20 - 90 PSI air pressure is recommended
for the most efficient performance. CAUTION: Never use
higher air pressure to increase the output of the tool
Overloading will drastically shorten the life of all internal
parts
• Dry and Clean Air: Drain daily and install filter at or near
the take-off point to prevent trouble from foreign matter
• Air Hose and Joints: Use air hose (the shorter, the
better), joints, and other fittings of good condition and
of proper size to avoid pressure drop
Lubrication
• Maintenance: Clean, inspect and lubricate all ring gears,
planet gears and bearings every 100,000 cycles NOTE: All
work must be performed by a trained and certified AIMCO/
AcraDyne repair technician Replace all worn parts with
original AIMCO/AcraDyne parts
• For Air motor: Place three drops of light spindle oil properly
through the air inlet daily and at shift change Always use
AIMCO Motor Oil when lubricating the air motor
• For Gears and Bearings: Supply recommended high-
quality grease (e g Dow Corning, Moly Kote, BR2 Plus
(or equivalents) properly once every 25,000 cycles and
when the tool is overhauled Over-greasing will cause dull
motion or heating