Technical documentation:
MyChron 3 XG LOG
– Version 1.07
5
button “Click here to auto-calibrate all
sensors in the list”.
To calibrate “on-board” gear sensor, “Mid
zero potentiometer” or “zero based
potentiometer”, click on the corresponding
“Calibrate” button and follow the instructions
prompted on your PC’s monitor.
Please note: calibration/auto calibration
procedure is fundamental to acquire
correct data.
finished, it is absolutely necessary to re-
transmit the configuration to your
MyChron 3
XG LOG
pressing the “Transmit” button.
