Aim MXS STRADA, User Manual

Page: 9 / 20

16 17
You can configure it in order to turn
them off when the condition disappears,
when you push a pushbutton or when
the test is finished.
Please refer to section 10.1.5 to see how
to use Race Studio3 to manage the
digital output
DIGITAL OUTPUT MXS STRADA CHAPTER 9
MXS Strada features one digital output of
1 Amp at 12 volts in the 23 pins AMP
connector.
The digital output (Dout) is a LOW-SIDE
type with internal 10 Kohm weak pull-up
resistor. Here below are some connecting
examples.
9. Digital Output
Connecting examples
Load up to 1 Amp directly managed by MXS Strada digital output. Load higher than 1 Amp requires an automotive relay
INSIDE EVO4s INSIDE EVO4s
INSIDE EVO4s
You can configure the digital output in
order to turn it on according to the
value of the analog or digital inputs,
ECU values, expansion values, GPS
information or math channels.
To each event you can associate an alarm
LED, a message and a digital output.