RACESTUDIO3 SOFTWARE
20
21
MXS STRADA
10.1.1 Channels configuration
Push the tab
CHANNELS:
10.1.2 ECU Stream
10.1.3 CAN2 Stream
By clicking on every line, a menu appears:
You can define:
n
Name of the channel
n
Function
n
Sensor used
n
The position (if needed)
n
Sampling frequency
n
Measure unit
Push the tab
ECU Stream:
Push the tab
CAN2 Stream:
CAN2 Stream works like ECU Stream and is normally used for non engine control units like
for example ABS management, suspension kits or similar.
Here you can select the proper ECU to
which your MXS Strada is connected. At
the very first configuration the panel here
on the right appears.
Select ECU Manufacturer and Model.
With this feature, you can enable or
disable the data coming from your ECU,
and you can define the frequency for
each channel and change their name.
The channel configuration page will appear. With this page you can define all the parameters
for your analog inputs, speed inputs and digital RPM input.
CHAPTER 10
Summary of Contents for MXS STRADA
Page 20: ...38 39 ...
