Aim MXS STRADA, User Manual

Page: 14 / 20

RACESTUDIO3 SOFTWARE
26 27
MXS STRADA CHAPTER 10
Press "Display" tab to configure MXS Strada display.
The page is divided in two different sections. On the right you can select one among different
layouts, while on the left you will manage the different fields. You can add up to eight pages.
With the CAN Output you can send messa-
ges directly to an existing CAN
network in order to improve the range of
vehicle control possibilities.
Press "CAN Output" tab to configure MXS
Strada CAN Output.
For each payload you can define:
n
ID CAN (Hex)
n
Byte number (DLC): up to 8 bytes
n
Byte order: little endian or big endian
n
Frequency up to 20 Hz
10.1.6 Display Configuration
10.1.7 CAN Output
Please use the lower left part of the display
to configure each channel. You can define:
n
Channel
n
Label
n
Measure unit
n
End of scale for each channel
When the panel shows the desired
configuration, push
“SAVE” or “CLOSE” to
save the configuration.
If you have connected your MXS Strada
to the PC,
“TRANSMIT” pushbutton over
the tab is activated: push it to transmit the
configuration to your dash.