CAUTION
Always check and be certain that the firearm is unloaded
before undertaking any work upon it.
FTG150
150 Lumens Flashlight with Tactical
Aluminum Grip
FTG180
180 Lumens Flashlight with Tactical
Aluminum Grip
INSTALLING BATTERY
1. Unscrew battery cap located at end of tactical grip
2. Install two CR123A batteries, positive poles first
3. Replace battery cap
ON/OFF OPERATION
1. Press and release the button in the center of the on/off push
button switch
MOUNTING FLASHLIGHT
1. Loosen thumb-screw and place grip light on the rail
2. Tighten the thumbscrew to lock the flashlight in position
3. Tighten the hex screws until you feel a slight resistance.
WARNING: DO NOT OVER TIGHTEN THE SCREWS OR YOU MAY STRIP THE
THREADED HOLES. STRIPPED HOLES ARE NOT COVERED BY WARRANTY.
FEATURES
• Made of anodized aircraft grade aluminum
• Equipped with USA made CREE LED light bulb
• Integrated tactical strike bezel head and grip
• Weatherproof
• Picatinny/Weaver base mount
• Ambidextrous push button on/off switch
SPECIFICATIONS
LIGHT BULB
USA CREE LED
MAX OUTPUT
150 or 180 LUMENS
VOLTAGE
3W
LENGTH
4.9”
NET WEIGHT
9.5 oz.
BATTERY
CR123A
TACTICAL GRIP FLASHLIGHTS
