E N D I N G B I L L I N G P E R I O D
1 2
6
Ending billing period
To end the meter’s billing period, make a short press on the red
push button. To access the red button, remove the sliding cover.
See chapter 2.3 Reserve battery.
Billing period ending is indicated with “--------End” on the
display.
It depends on the configuration, which tariff registers are ended.
To prevent extra billing period endings there is also a
configurable BP ending lock period (0 – 10080 minutes). Refer
to E700UI Manual for Installation and Use.
Note!
When ending billing period using the red push button, meter’s
display must be in auto scrolling mode or manual scrolling mode,
not in time setting mode.
©
Enermet Oy
E700
Manual for Installation and Use v. 6.31
ACTIVE INFORMATION MANAGEMENT
