![background image](http://html1.mh-extra.com/html/aim/api-fdx-2-v2/api-fdx-2-v2_getting-started-manual_2871728010.webp)
2
API-FDX Linux Getting Started Manual
GmbH
Section 1 – Introduction
1.2. How This Manual Is Organized
This manual is organized as follows:
Section 1,
INTRODUCTION
, contains an overview of this manual.
Section 2,
REQUIREMENTS
, lists all the requirements the system must meet for the
BSP.
Section 3,
NEW BSP INSTALLATION PROCEDURE
, describes the procedure used to
install the BSP software and the AFDX hardware on a system that does not have a
previous API-FDX BSP installed.
Section 4,
BSP UPGRADE PROCEDURE
, describes the procedure used to upgrade the
BSP software and the API-FDX onboard flash firmware on a system that has a
previous API-FDX BSP installed.
Section 5,
COMPILING AND RUNNING A SAMPLE PROJECT
, contains the procedure
used to build, and run a sample project included in the BSP.
Section 6,
RECOMPILATION AND REINSTALLATION OF THE DRIVER
, contains the
procedure necessary when the system’s kernel is changed.
Section 7,
PROGRAMMING THE API-AFDX MODULE
, contains sample source code
and describes how to program applications which can be used to send and receive
frames using the FDX interface module