2021-10-28
REV2.0
Flexible parts feeder system
AIM company
l
www.aim-fa.com
26
3-4) Manual control
This function can be operated manually using the control panel on the side of the AIVE.
It is possible to operate when the power is applied and the switch is turned on. How to control
with digital IO and
same.
1.Manual on : Activate manual mode.
2.Serve on : The motor turns on.
3. Home : Activate the encoder's location information.
3.Func#1, Func#2 : It operates using two specified parameters.
It works the same as Digital IO. The parameters are available through the AIVE pc
program.
4.Fault relase : Clear the error.
If there is no feedback from Serve On, Home or Connect or the motor is not running
5.Back light :
Turn AIVE's room lighting on or off.
6. Reset :
You can reset any memory you set on the control port.
