7 |
OPERATION OF THE HEATER
POWER SETTINGS
Note:
It is normal for the heater to emit a smell and fumes when it is turned
on for the first time or after not being used for a prolonged period.
The fumes will disappear after a short while of the heater being in use.
1. Choose a suitable location for the heater, as per the safety instructions
stated above.
2. Insert the plug of the heater into a suitable socket.
3. Turn the thermostat knob fully in a clockwise direction to set it to the
maximum setting.
4. Turn on the heating elements using the switches situated on the side
panel. When the heating elements are on, the switches will illuminate.
For maximum heat output, both of the switches should be on.
5. When the desired room temperature has been reached, the thermostat
knob should slowly be turned anti-clockwise; until a click can be heard
and the lights on the element switches turn off. After this, the heater
will regulate the air temperature in the room by switching on and off
automatically.
There are two separate power settings: 750 W & 1250 W.
The settings can be used individually or combined to get the heater to work
on 2000 W power.
Turn on the 750 setting; the heater works on 750 W power.
Turn on the 1250 setting; the heater works on 1250 W power.
Turn on both settings; the heater works on 2000 W power.
Summary of Contents for ACH20
Page 12: ......
