background image

|   6

1.  If the heater is used as a portable appliance, ensure the feet are 

correctly attached before use.

2.  Ensure the power supply to the socket into which the heater is plugged is 

in accordance with the rating label on the heater. 

3.  Keep the mains lead away from the body of the heater at all times.

4.  The heater is not intended for use in bathrooms, laundry areas or similar 

indoor locations. Never place the heater where it may fall into a bathtub 

or other water containers.

5.  Do not use outdoors.

6.  Do not cover or obstruct any of the heat outlet grills or any of the air 

intake openings of the heater.

7.  Do not place the heater on carpets having a very deep pile.

8.  Always ensure that the heater is placed on a steady and level surface. 

Do not placing the heater close to curtains or furniture as this could 

create a fire hazard.

9.  Do not position the heater in front of, or immediately below a  

 

wall socket. 

10. 10. Do not insert any object into the heat outlet or the air intake grills  

of the heater.

11.  Do not use the heater in areas where flammable liquids are stored or 

where flammable fumes may be present.

12. Particular care should be taken when the heater is situated in areas 

where children and individuals with disabilities are present. 

13. Always unplug the heater when moving it from one location to another. 

14. Do not use the heater if the power cord is damaged. The power cord 

must be replaced by the manufacturers accredited service agents.

SAFETY INSTRUCTIONS

(TO BE READ BEFORE OPERATING THE HEATER)

Summary of Contents for ACH20













Reviews: