background image

45

6. Maintenance

Cleaning

Notes on cleaning

Wash the product by band using water under 30

C.

Chlorine bleach must not be used.

When ironing, cover with another cloth and iron at low 
temperature from the surface.
Do not use dry cleaning.

Do not wring.

Fix the form and dry completely by hanging in the shade.

 Caution

The nonslip pads cannot be washed.
The cushions supplied to this child seat cannot be washed. When you 
wash the holding cushions, remove the cushion inside it. To clean the 
cushions, soak a cloth in neutral detergent diluted with water and wring 
it out, then use it to wipe them. Do not use a solvent like a thinner.


 Info

Urethane foam is used to achieve good cushioning performance. It may 
become discolored, since that is a property of this material. It does not 
affect performance.

The form and specifications of the body cushion, body cover, headrest 
cover, and crotch harness cover differ with the type of the product.

Nonslip pads

Headrest cover

Body cushion

Crotch harness cover
Body cover

 Warning

Do not use a solvent like a thinner to clean the body or harnesses.

Safekeeping for the child seat

Push down the headrest to the lowest and place the footrest in 
the position of forward-facing use.
Cover it with any sack, and keep it out of direct sunlight.

Disposing of the child seat

Dispose of it in the manner speci

fi

 ed by your local government.

If you dispose of it because of an accident, write “Broken by 
accident” on its body conspicuously with a marker pen or equivalent.


 Info

We recommend that you to take a safety check of the seatbelt of the 
vehicle after an accident at a dealership.

Specifications

Dimensions

H 710*×W 500×D 550 mm 

(*in reclining 

step 1st and with the headrest set lowest)

Mass

8 kg

Materials of the body

Polypropylene 

(including polyamide and 

others)

Materials of the body 

cover and Holding 

cushions

Polyester (outer material)/ Urethane 
foam (lining)

Materials of cushions

Polyurethane foam

Summary of Contents for swing moon

















































Reviews: