2
4.1 MT9207 178-mm (7-inch),
MT9214 356-mm (14-inch) and
MT9224 610-mm (24-inch)
Column Mounts
SAFETY PRECAUTIONS
The exclamation point within an equilateral triangle is
intended to alert the user to presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
SECURITE
Le point d'exclamation à l'intérieur d'un triangle
équilatéral avertit l'utilisateur de la présence d'in-
structions importantes d'utilisation et de mainte-
nance dans la documentation accompagnant l'ap-
pareil.
SICHERHEITSVORKENHRUNGEN
Das Ausrufezeichen in dem gleichseitigen Dreieck ist
dazu da, den Benutzer auf wich-tige Inbetriebnahme-
und Instandhaltungs-vorschriften hinzuweisen, die
dem Gerät in Form einer Broschüre beigelegt sind.
PRECAUCIONES DE SEGURIDAD
El símbolo de exclamación dentro de un triángulo
equilátero, se muestra con el objetivo de alertar al
ususario de que instrucciones de operación y man-
tenimiento importantes acompañan al equipo.
Top
Side View
1. Determine a secure mounting location, either for a
pedestal (floor) mounted installation or for an overhead
(ceiling) mounted installation.
2.
Caution
:
a. For a secure mounting installation, bolts should
extend through the mounting surface and be secured
with nuts, washers, and lock washers on the opposite
side.
b. If studs are used, they should either be anchored in
concrete or welded to a steel backer plate.
c. If the MT9207, MT9214 or MT9224 is mounted to
wood or a blind structure (with no access to the
rear) in a ceiling, make certain that the mounting fas-
teners have a
minimum
pull-out strength of 600
pounds.
1
UNPACKING
Unpack carefully.This is mechanical equipment and should be
handled carefully.
Check for the following items:
• Verify the unit model number.
• Installation and Operating Instructions.
If an item appears to have been damaged in shipment, replace
it properly in its carton and notify the shipper. If any items are
missing, notify Aigis Mechtronics.
The shipping carton is the safest container in which the unit
may be transported. Save it for possible future use.
2
SERVICE
If the unit ever needs repair service, the customer should
contact Aigis Mechtronics.
3
DESCRIPTION
These versatile indoor/outdoor mounts accommodate fixed
cameras, housings, pan/tilts, and scanners.
4
INSTALLATION
See
SPECIFICATIONS
for the maximum rated load of
mount.
Mounting Hardware: Not furnished.
Note
:The use of stainless steel or zinc-plated fasteners is
recommended.
WARNING
:The maximum rated load is reduced to 45.3
kg (100 lb) when mounted beneath a ceiling.
3. Locate and drill four mounting holes using the end flanges
as a template.
4. Using four bolts (or studs) with nuts, washers, and lock
washers, fasten the MT9207,MT9214 or MT9224 to its
mounting location and tighten all nuts securely.
Note
:The
minimum
diameter bolt (or stud) required is
10 mm (3/8 in).
5. To mount the MT9227 Adjustable Head Bracket:
a. Use the mounting hole which is located in the center
of the MT9207, MT9214 or MT9224 mounting plate.
This mounting hole is threaded to receive a 1/4-20
bolt.
b. Insert a 1/4-20 hex head machine bolt with washer
and lock washer through the MT9227 base plate and
into the threaded insert on either end flange of the
MT9207, MT9214 or MT9224.
6. To mount the MT9237 Heavy Duty Adjustable Head
Bracket:
a. Line up the holes in the corners of the MT9237 base
plate with the slots in the mounting flange.
b. Insert a 3/8-16 x 1” hex bolt through the base plate
and mounting flange, using a 3/8” flat washer and a
3/8” spiral lock washer under the head of the bolt.
c. From the underside of the mounting flange, use a
3/8” flat washer and a 3/8-16 hex nut to secure the
MT9237 to the mounting flange.
