Connect Family
CP-WALLPLATE-5
Wall Mounting Plate
IN
STALL
G
U I D E
I
The Wall Mounting Plate
is designed to cover paint
and holes left by legacy panels and interfaces.
Features
• Designed for use with RE667 Slimline Touchpad and
RE663 LED Keypad control units
• Sold in a convenient 5-pack
Installation
1.
There are three wall mounting configurations.
A. If mounting on a stud or in a gang box,
use the two centered holes labeled below [A].
Use the mounting hardware kit from the RE663 LED Keypad or RE667 Slimline Touchpad.
B. If not mounting on a stud or in a gang box,
use the
four mounting holes below [B]. Use
the mounting hardware kit from the RE663 LED Keypad or RE667 Slimline Touchpad.
Insert the wall anchors prior to securing the screws in place.
C. To cover a large hole,
press the two blind screw mounting features [C] into the drywall
to create pilot hole alignment marks. Use the additional two lower mounting holes from B
to secure the plate. Use the mounting hardware kit from the RE663 LED Keypad or RE667
Slimline Touchpad.
Note:
optional wire holder [D] can be used.
A
D
C
B
D
B
