DAC4500
TROUBLE
SOLVING
PROBLEMS
POSSIBLE CAUSES
SUGGESTED SOLUTIONS
Air leaking near the top
the
tool or in the trigger
area.
1.
Loose screws.
2.
Worn or damaged O-rings or seals.
1.
Tighten screws.
2.
Install overhaul kit.
Air leaking near the bottom
of the tool.
3.
Loose screws.
4.
Worn or damaged O -rings or seals.
1.
Tighten screws.
2.
Install overhaul kit.
Tool does nothing or
operates sluggishly.
•
Inadequate air supply.
•
Tool is too dry.
•
Exhaust blocked.
•
Worn or damaged 0-rings or seals.
1.
Make sure the air compressor is
set
between 60PSI and 100PSI.
2.
Add about 2-3 drops of lubrication
into the air connector.
3.
Clean exhaust channel.
4.
Install overhaul kit.
Fasteners are jammed in
the
tool frequently.
1.
Driver channel is worn.
2.
Piston is broken or worn.
3.
Bent fasteners.
4.
Dirty magazine.
5.
Loose magazine.
6.
Wrong fasteners.
1.
Fix the drive channel.
2.
Replace the piston.
3.
Remove the bent fasteners,
replaced
with the right fasteners.
4.
Clean magazine.
5.
Tighten screws.
6.
Verify that fasteners are the
correct size.
ENVIRONMENTAL PROTECTION
When disposing of the product’s packaging, observe the local instructions given for garbage disposal and recycling, depending on the
material.
WARRANTY
The product has a 12-month warranty, counted from its purchase date.
The importer is responsible for the replacement of any faulty device or its parts, due to any error originated from their material and
manufacturing, if during inspection, they are found faulty.
When demanding the warranty, the buyer should present the payment receipt, purchase invoice, warranty certificate or dispatching list.
The product should be wholly returned, with an account of its malfunctions.
The warranty will be void if the machine has been opened, repaired, had its parts replaced or its structure modified. The warranty is not
valid for professional or leasing use.
The warranty will not cover accidents caused by normal wear, incorrect use or abuse. The warranty will not cover shipment, damage
caused by shipment or any indirect expenses.
The warranty repair only can be performed by the service appointed by the importer.
Modification Rights reserved.
Importer / Manufacturer:
Veljekset Keskinen Oy
Onnentie 7, 63610 Tuuri, FINLAND
Tel. +358 10 770 7000
28
Summary of Contents for DAC4500
Page 29: ...DAC4500 29...
