Aichi Tokei Denki TBX100 Instruction Manual Download Page 24

 
 
 

 

 

Warranty of the turbine gas meter for management and control 

Base model names:   TBX30, TBX100, TBX100F, TBX150F, TBX30D, TBX100D, TBX100FD, 

TBX150FD 

This product has been delivered through strict quality control and close inspection. This warranty is 
to assure that this product will be replaced at no charge on the basis of the conditions described in 
this warranty, in the event that this product goes out of order under the customer's normal use 
conditions.  

Note 

1.    The warranty period is one year from the date of purchase, and the warranty covers only the 

main body. In the event that a failure occurs during the warranty period, contact us presenting 
this warranty.   

2.    This warranty will not be reissued. Retain it in a safe place.   
3.    Refer to the following for the provisions of this warranty. 

Provisions for free-of-charge replacement 

1.    Aichi Tokei Denki will replace the product at no charge in the event that it goes out of order 

within one year under normal use conditions in accordance with the directions in the instruction 
manual.  

2.    This warranty must be presented when you have the product that has gone out of order within 

the warranty period replaced at no charge.   

3.    Even in the warranty period, the following cases will not be covered by the warranty.   

1)    Malfunction or damage due to an error in use or an illegal adaption 
2)    Malfunction or damage due to the relocation of the mounting position, impact, or falling 

after the purchase   

3)    Malfunction or damage due to a human-made disaster; flood damage, earthquake, 

lightening, or other natural disaster; pollution, or abnormal voltage 

4)    Lack of presentation of this warranty 
5)    Malfunction or damage due to the use of a gas out of specification 

4.    This warranty is valid only in Japan. 

 

Date of purchase 

___ / __ 

Name of the customer 

 

Address  

Fill in the columns based 
on the nameplate. 

Model  

Serial  

Name of the gas used 

 

 
Dear customer,   
Please fill in the date of purchase, name, address, model, serial number, and name of the gas used 
when you receive this warranty.   
 

  Aichi tokei denki co., ltd.

 

1-2-70 Chitose, Atsuta-ku, Nagoya, 456-8691, JAPAN 

URL:http://www.aichitokei.co.jp

 

 

 

 

Contact us at your nearest branch office or business office. 

 

Sapporo Branch Office  TEL (011)642-9500 
Kushiro Sales Office 

TEL (0154)23-7859 

Sendai Branch Office 

TEL (022)258-1181 

Aomori Sales Office 

TEL (017)742-6771 

Morioka Sales Office 

TEL (019)646-8836 

Tokyo Branch Office 

TEL (03)3209-0631 

Yokohama Sales Office  TEL (045)661-1491 
Chiba Sales Office 

TEL (03)5658-1320 

Omiya Sales Office 

TEL (048)668-0131 

Niigata Satellite Office  TEL (025)282-5591 

Nagoya Branch Office

TEL (052)661-5852

Kanazawa Sales Office  TEL (076)252-1942 
Shizuoka Sales Office 

TEL (054)237-7168 

Nagano Satellite Office  TEL (026)254-5677 
Osaka Branch Office 

TEL (06)6305-9052 

Hiroshima Sales Office 

TEL (082)292-8289 

Takamatsu Sales Office  TEL (087)851-6664 
Okayama Sales Office 

TEL (086)207-6828 

Fukuoka Branch Office 

TEL (092)534-2050 

Kagoshima Sales Office  TEL (099)254-7877 

Miyazaki Satellite Office TEL 

(0985)24-2279

Okinawa Satellite Office TEL 

(098)860-9792

Overseas Sales Headquarters TEL (052)661-5150
 

 

 

Preservation 

bag

 

Revised

18.04

Summary of Contents for TBX100

























Reviews: