- 3 -
- 4-
2 to 4 seconds
Instantaneous flow rate hold display
１２．３
(Maximum of 4 digit display)
* Even during the hold mode, this
Indicator continuously calculates
instantaneous flow rate, integrated
value, and integrated flow rate (trip).
(Maximum of 4 digit display)
Instantaneous flow rate
１２．３
Approx. 3 sec
* When switching from
the integrated flow
rate display to the
instantaneous flow
rate display
ＣＬ
(Blinking)
Integrated flow rate display
１２３４５６７８
(Blinking)
2 to 4 seconds
2 to 4 seconds
Integrated flow rate display
１２３４５６７．８
(Constant 8-digit display)
Switching the display
Approx. 3 sec
* The trip value will not be cleared to
zero when switching from the
integrated flow rate (trip) display to
the instantaneous flow rate display.
(Maximum of 6 digit display)
Integrated flow rate (trip) display
１２３４．５
Zero clear the
integrated value
Constant setting
mode
* When further pressed
continuously for 2 seconds or
more after the integrated flow
rate display started blinking.
2 to 4 seconds
Zero clear the
trip value
Approx. 3 sec
Ｕ
Ｈ
TOTAL
TRIP
TOTAL
TRIP
TOTAL
TRIP
TOTAL
TRIP
L/min
L/min
L/min
L/min
L/min
L/min
L/min
L/min
L/min
L/min
L/min
L/min
■
NH: Switch operation
・
When the integrated flow rate is displayed, the display can be switched from the integrated flow rate
(trip) display to the instantaneous flow rate display.
・
When the switch is pressed for approx. 3 seconds during the instantaneous flow rate display, the
screen will display the data immediately before switching to the instantaneous flow rate display.
(When switching to the integrated flow rate (trip) display, the value of integrated flow rate (trip) will
not be cleared to zero.)
・
When the switch is pressed again during the instantaneous flow rate display, the screen will hold the
instantaneous flow rate displayed when pressed.
・
If the switch is pressed again when holding the instantaneous flow rate display, the holding will be
released.
・
If the switch is pressed when the integrated flow volume display is blinking, the CL display will blink.
・
If the switch is pressed when the CL display is blinking, the integrated value will be reset and
integrated flow rate will be displayed.
・
During the integrated flow rate display or the instantaneous flow rate display, the display can be
switched to the integrated flow rate (trip) display. In switching, the integrated flow rate (trip) value
is cleared to zero.
・
If pressed during the integrated flow rate (trip) display, the value of integrated flow rate (trip) will be
cleared to zero. If further pressed for 3 seconds, the screen will be switched to the integrated flow
rate display.
・
If pressed when the integrated flow rate display or CL display is blinking, the screen will be switched
to the integrated flow rate display. In switching, the integrated flow rate value will not be reset.
・
If pressed simultaneously for 2 to 4 seconds, the integrated flow rate display will blink.
・
If pressed simultaneously for 4 seconds or more, the screen will switch to the constant setting mode.
(The operating procedure specified separately)
■
NH: Constant setting function
・
The screen will switch to the setting mode when the two switches on the left are pressed
simultaneously for 4 seconds or more.
・
If no switch is pressed for 10 seconds or more or if TOTAL/TRIP switch is pressed when
the constant setting value is lit, the screen will return to the integrated value display. Then,
the setting value of the item where setting is not completed will be invalid.
Mode No.1 (Set the equivalent value of pulse constant *)
When the L/min switch and the TOTAL/TRIP switch are pressed simultaneously for 4 seconds or more, the screen
will switch to Mode No. 1 and display the following. ("
○
" shows the present setting value.)
Mode No.1
1.
When the L/min switch is pressed for 2 seconds, the most significant digit of the setting value will blink, showing
ready for setting.
2.
Each time the L/min switch is pressed, the setting value will change in turn. (Setting value is 0, 1, 2, 3, 4, 5, 6, 7,
8, or 9.)
3.
When the TOTAL/TRIP switch is pressed, the value is set and the following digit will blink, showing ready for
setting.
4.
Repeat this procedure until the least significant digit is set. Then, the screen will return to the state of "1" above.
5.
When the L/min switch is pressed for 2 seconds, the set value will be lit and setting will be completed.
Mode No.2 (Set the EXP value for the equivalent value of pulse constant *)
If the L/min switch is pressed when Mode No. 1 is lit, the screen will switch to Mode No. 2 and display the following.
("
" shows the present setting value.)
1. When the L/min switch is pressed for 2 seconds, the setting value will blink, showing ready for setting.
2. Each time the L/min switch is pressed, the setting value will change in turn. (Setting value is 0, 1, 2, 3, 4, 5, 6, or
7.)
3. When the L/min switch is pressed for 2 seconds, the set value will be lit and setting will be completed.
* Mode No. 1 functions as equivalent value, and No. 2, as EXP value. By entering these equivalent and EXP values,
pulse constant can be set. The unit of the pulse constant set by Mode No.1 and Mode No.2 is L/P.
L/min
TOTAL
TRIP
L/min
TOTAL
TRIP
+
L/min
TOTAL
TRIP
+
1.
× 1000 × 100 × 10 × 1
Equivalent value
EXP value
Mode No.2
* If the TOTAL/TRIP switch is pressed or no
key is entered for 10 seconds, the integrated
value will not be cleared to zero and the screen
will return to the integrated flow rate display.
TOTAL/TRIP
TOTAL/TRIP
TOTAL/TRIP
TOTAL/TRIP
TTAL/TRIP
＋
＋
＋
＋
2.
