Importé par :
AIC International - 44980 Ste Luce sur Loire - France
Press «
MODE
» button to confirm setting: minutes of alarm flashes. Use «
UP
» to set
hour alarm time.
Press «
MODE
» button to confirm setting: 05 flashes. You can set snooze interval from 5
to 60 minutes. Use «
UP
» to set snooze gap.
Press «
MODE
» button to confirm setting and exit alarm time setting.
For your information:
The display will return to standard mode after 30 seconds of inactivity.
Crescendo alarm during 2 minutes: alarm rings more quickly. Press « MODE » or « UP »
to stop it.
If you don’t stop it: alarm will ring again after 24 hours.
Snooze function :
When alarm rings, you can activate snooze function. Just touch white frame (up and bottom
parts). Alarm will ring again according to snooze interval setting: «
SNOOZE »
flashes
above time display and icon
«
» displays.
Stop snooze function thanks to «
MODE
» ou «
UP
» buttons.
Alarm Activation/ deactivation:
Touch and hold white frame (top or bottom parts) during 4 seconds.
You hear « bip » and icon
displays: alarm is activate.
Touch and hold again white frame (top or bottom parts) during 4 seconds :icon
disappear, alarm is deactivate.
Blue backlight activation :
Just « touch » white frame to activate blue backlight (top or bottom parts). Blue backlight
will activate for 5-6 seconds.
Cleaning
:
Clean thanks to smooth cloth or microfiber to avoid any scratches on white frame.
Batteries replacement
:
Once display attenuates or blue
backlight don’t work anymore: replace old batteries.
Open batteries compartment at the back of clock. Remove used batteries and Insert 3 new
AA batteries:
m
eet the right polarity. A wrong position might damage the product).
Then close the battery case
Failure indices:
Defects
Solution
Clock
doesn’t get
RCC signal
The main causes of reception failure are …
Atmospheric and local interferences.
Interference from electrical equipment e.g. T.V, computers or radios within 2
meters of the clock.
Location of the clocks internal receiver within the building.
Reduced local signal due to steel framed structure.
Reduced signal due to interference problems in your house or building.
Outside the normal transmission radius.
We advise to activate RCC signal (press and hold
UP
key or remove
batteries), well place the weather station closed to the window, and far
away interference frequencies.
Temperature or
hygrometry display
“LL”
Your clock stores data beyond possible threshold for reminder :
-
indoor temperature from 0 à 50°C
-
indoor hygrometry from 20%-95%
NB : Batteries should never be thrown away or incinerated but disposed of in accordance with the local regulations
concerning chemical waste.
The product constitutes the applicable product according to the WEEE and ROHS directives; when discarding the unit,
comply with local rules or regulations.