Importé par :
AIC International - 44980 Ste Luce sur Loire - France
3.
Settings
:
Radio-controlled signal
:
The clock will enter RCC receiving status automatically after inserting batteries: a tower-
shaped symbol
on the LCD will flash.
After receiving the synchronization signal, RCC symbol fully displays: time and calendar
are setting automatically.
If the reception is successful, it will not enter the receiving again that day.
RCC receiving time is 10 minutes.
In case of bad receipt, you can press and hold
“UP”
button for 2-3 seconds to enter
manual RCC receiving status: tower icons flashes.
The clock automatically receives RCC signals every day.
During receiving, press and hold
“UP”
button for 2-3 seconds, the clock will exit reception
of the signal.
When the clock fails to synchronize, it will attempt to receive the radio-signal at 2:00 a.m.
the next day.
When DST signal is received, the DST symbol will display on LCD.
Keep away from electrical equipment e.g. T.V, computers or radios within 2 meters of the
clock which can create interferences for RCC good receipt.
Display function :
Vous pouvez sélectionner l’affichage de la fonction souhaitée :
Press 1 time «
MODE
» button: date displays during 12 seconds, then time displays.
Press twice «
MODE
» button: temperature / hygrometry display during 12 seconds, then
time displays.
Press 3 times «
MODE
» button: alarm time displays during 12 seconds, then time displays.
Press 4 times «
MODE
» button:
displays at the top right corner, all function will
display alternately (time / calendar / temperature-hygrometry/ alarm time)
Time setting (manual)
Press and hold
MODE
button for 3 seconds to enter time settings.
With each press of
MODE
button, it will advance through the following sequence: time zone
hour
minute
Year (2000-2099)
month
date
temperature unit °C or °F. Confirm
each setting
using button “
MODE
” and exit.
While setting, press
“UP”
button, the setting will advance one step; press and hold the
button for more than 2 seconds and the setting will advance rapidly (8 steps per second).
Time zone information
: 00
flashes, to set time zone if you are in a country with some jet lag
from Radio-controlled signal, so jet lag with Germany. For example, if you set -02, once
clock will catch radio-controlled signal, time will display with - 2 hours (from Germany
time).
The display will return to standard mode after 30 seconds of inactivity.
Alarm setting :
You can set daily alarm with snooze interval setting.
Press 3 times «
MODE
» button : alarm time displays.
Press and hold 3 seconds «
MODE
» button: hour of alarm flashes. Use «
UP
» to set
hour alarm time.