AHS Antriebstechnik 6410, Application Note, Page: 6 / 8

www.ahs-antriebstechnik.de
Technische Änderungen vorbehalten / Specifications are subject to change without notice
AN-01-EN-6410-BA.doc Step motor drive TSP10-BA Page 6 of 13
TSP10
For the switch position S1 = 0, the motor current is a preset value. This value can be modified
and saved in the TSP10-BA with the set-up program "TopSuite".
Values range: 200 ... 7000 mA
rms
Step resolution / Idle current reduction
With the rotary switch for the step resolution (S2), also the delay time for the current reduction
is set. The motor current is reduced to 50% after the delay time expires (position 0...7).
No current reduction is done for the switch positions 8 to F.
S2 Position 0 ... 7 idle time = 0.1 Second, Idle Current Reduction to 50 %
S2 Position 8 ... F no current reduction
6410 TSP10-BA
Revolutions per
steps
DIP1 DIP2 DIP3 J 3-4 Switch S2 Position
with SSR
without
SSR
1/1 (200/full step) close close close set 1 9
1/2 (400/Half
step)
close close close open 2 A
1/2 (400/Halfstep)
close close open set 2 A
1/2,5 (500) --- --- --- --- 3 B
1/4 (800) close close open open 4 C
1/5 (1000) close open close set 5 D
1/8 (1600) close open close open --- ---
1/10 (2000) close open open set 6 E
1/16 (3200) close open open open --- ---
1/25 (5000)
open close close set 7 F
1/32 (6400) open close close open --- ---
1/50 (10000)
open close open set 0* 8
1/64 (12800) open close open open --- ---
1/125 (25000)
open open close set --- ---
1/128 (25600) open open close open --- ---
1/250 (50000)
open open open set --- ---
1/256 (51200) open open open open --- ---
*
Switch S2 to Position 0 = factory set-up