The abbreviation for the function is indicated at the right side of the value. If
sensor parameters are involved the number of the channel is also indicated:
Meas. Val.:
chann.
-
meas. value
dimension
11:2.1 2 3 4 m
V
Range:
chann.
short name
R
1: N i C r
R
Parameter:
chann.
-
value
function
1: 1 2 3.4
MH
Cycles:
hours minutes seconds
function
0 0:1 5:0 0
PC
Times:
hours minutes seconds
TM
1 2:3 4:5 6
TM
Date:
day
month
year
DA
0 1.0 1.9 9
DA
Baud rate:
outp.chan. format baud
BR
U n 9 6 0 0
BR
The devices can also be individually configured for each application by setting
the key functions via interface (AMR-Control) (see manual 6.10.13.3). Even
storing a configuration in an ALMEMO
®
configuration connector is possible, i.e.
the functions can also be activated by the formerly required programming
modules.
The additionally activated functions can be
cleared
by pressing the key
CLEAR
when switching the device on.
5.3 Keyboard
The keyboard (6) has the following functions that are displayed above the keys:
Function
Normal
Enter
Start and stop of meas. point scans
START/STOP
ENTER
Selecting the measuring points
CH
CLEAR
Meas. value
MEAS. VAL.
+/-
Selecting the measuring functions
F1
Selecting the programming functions
F2
If the key
is pressed for longer than one second a digit or an
ENTER
abbreviation is flashing in the display indicating that the device is in the edit
mode and that the
red
designations below the keys are valid. The keys
+/-
, ,
are then available for altering the input figure, the key
operates
ENTER
as cursor key and
CLEAR
is available for clearing parameter data. The input is
complete when the last digit has been confirmed with operating the key
ENTER
ALMEMO
2290-2/3
19
Display and Keyboard
Summary of Contents for ALMEMO 2290-2/3
Page 44: ...44 ALMEMO 2290 2 3 Appendix ...
