AgXcel Synergist GX40 System, Reference Manual, Page: 4 / 36

www.agxcel.com info@agxcel.com
4
AGXCEL INTEGRATION INTO THE TRIMBLE
System Overview - Example with GX40 Synergist
AgXcel Precision Fertilizer Application Systems (FAS) are designed to integrate into various OEM controllers.
This installation guide will assist in the controller configuration settings for the in-cab monitor. The integra-
tion process begins with the users purchase and installation of the corresponding OEM's Liquid Rate Control
Module.
The picture below displays the Trimble Rate Controller with the AgXcel integration harnesses. Each Trimble
Rate Controller can control one product. Therefore, if you were applying two liquid fertilizers on you plant-
er, you will need three rate controllers, one for seed and two for liquid fertilizer. The harness coming out of
the Trimble rate controller is a 30 pin amp connector that will be connected to the AgXcel 30 pin cinch con-
nector extending from the AgXcel GX system.
Trimble Harness
F.
AgXcel Control
Harness
(Connects to PWM)
PN#53697
C.
AgXcel Integration
Harness PN# 53519
D.
Section Valve
Harness
A. Trimble Rate and Section Control Module
B. FM1000
C. AgXcel Integration Harness - Part #53519
D. AgXcel Section Valve Harness - Part #53594
E.
MCV Harness PN# 54406
F. AgXcel Control Harness - PN#53697
G. AgXcel GX40 Synergist
In-line Check Valve
Feed to Shanks or other
applicators
Wilgers
3/8” Hose from flowmeter to Micro
Valves then to manifolds
G.
B.
This harness connects to the AgXcel harness
(PN# 53697) PWM 16pin round connector for
pump control and the Agxcel section control
harness. (PN#53594)
18 Pin Connector
• Connects to
Trimble Harness
back to in cab
display
E.
Valve Harness
will connect into
the MCV harness or
Direct, depending
on rows & setup
A.