g) Do not operate the Post driver hammer unless thoroughly trained or under the supervision of an instructor.
h) Become familiar with the carrier controls before operating the carrier and the Post driver hammer.
i) While learning to operator the Post driver hammer and carrier, do so at a slow pace. If necessary, set the carrier
mode selector to the slow position.
j) Make sure all controls (levers and pedals) are in the neutral position before starting the carrier.
k) Before leaving the carrier, always lower the boom and ensure the carrier is stable. Never be the machine with the
engine running. Always engage the parking brake.
l) Stop the engine before attempting to make any repairs, adjustments or servicing to either the carrier or the Post
driver hammer.
m) Do not operate the Post driver hammer at oil temperatures above 175˚F/80˚C. Operation at higher temperatures
can damage to the internal components of the Post driver hammer and back-hoe/excavator and will result in reduced
Post driver hammer performance.
n) Do not operate a damaged, leaking, improperly adjusted, or incompletely assembled Post driver hammer.
o) Do not modify this Post driver hammer in any manner.
p) To avoid personal injury or equipment damage, all Post driver hammer repairs, maintenance and service must only
be performed by authorized and properly trained personnel.
q) If you do not understand how to safely operate your Post driver hammer, contact an authorized dealer for
assistance.
r) Keep this manual with the Post driver hammer.
s) Do not operate this equipment if you are taking medication which may affect your mental judgment or physical
performance.
t) Do not operate the equipment if you are under the influence of drugs or alcohol.
u) Remove the Post driver hammer from the carrier during transport.
https://www.agrotkindustrial.com
/
