Wiring the Campbell Scientific
CS650 / CS655 Sensors to the Aqua Trac Unit
Wiring the CS650 / CS655 sensors:
Find the group of terminals (3) with the group label SDI.
1.
Connect the Green wire from the CS Sensor to the terminal marked SIG as shown above.
2.
Connect the Clear, Black, and Orange wires from the CS Sensor to the terminal marked
GND as shown above. (above shown using a wire nut to connect all 3 wires together)
3.
Connect the Red wire from the CS Sensor to the terminal marked PWR as shown above.
Page 9