27
NOTICE
This is an „i-size“ Child Restraint System. It is approved to Regulation No. 129, for use in, „i-Size compatible“ vehicle
seating positions as indicated by vehicle manufactures in the vehicle users manual.
If in doubt, consult either the child restraint manufacturer or the retailer.
• This car seat can be installed forward facing with the ISOFIX anchorage in a vehicle equipped with ISOFIX
anchorage points, in combination with a 3-point belt approved to UN/ECE Regulation No. 16 or other. Where there
is no ISOFIX anchorage available in the vehicle position. This car seat can be installed forward-facing with a 3-point
belt, approved to UN/ECE Regulation No. 16 or other.
• This car seat is approved for stature height 100cm-150cm, in the forward-facing direction.
• When used for stature heights between 135-150cm, the car seat might not fit in all vehicles, due to a low position
of the vehicle roof at the side.
• Before every use, make sure that the 3-point bel tis not damaged or twisted and installed tight.
• When used without the ISOFIX anchorages connected, the seat should always be restrained by the vehicle belt
when i tis transported without the child.
• When the child is taller then 150cm, or the shoulders exceed the highest position for the shoulder belt guiders, the
child must change to a seat suitable for longer children, normally the vehicle seat.
• After an accident, the seat must be replaced. Although it may look undamaged. If you were to have another
accident, the seat may not be able to protect your child to the level to which it was designed.
EN
Summary of Contents for Petite&Mars Elite Fix i-size
Page 62: ......
