USER MANUAL
39
03/2017
PR8:
IMPORTANT:
When reducing the pressure, take care not to loosen the
nut too much (when you wish to reduce the pressure to
below 1 bar), otherwise the nut may fall off the regulator
along with some other essential regulator components.
The PR8 regulation valve enables manual adjustment of operating
pressure from 0 to 40 bar and its maximum flow capacity is 160 l/min
at the operating pressure of 2 bar. The pressure is reduced by turning
the plastic nut at the top of the regulation valve to the left (-) or
increased by turning the nut in clockwise (+).
In addition to the manual regulation valve, the EC version is also equipped with a solenoid regulation
valve that enables operation from the tractor cab.
IMPORTANT:
During normal use, make sure that the manual regulation
valve is fully tightened, otherwise the regulation through
the solenoid valve will not work.
PR9:
The electric motor solenoid valve for automatic pressure regulation
from 0 to 40 bar is an integral part of the PR9 high-pressure
regulator.
Summary of Contents for AGP 1000 EN
Page 2: ......
Page 59: ...NOTES ...
