USER MANUAL
26
03/2017
9.9.
ADJUSTABLE AXLE
By all sprayers with wheels, the wheel axle is
clamped in the chassis in a way that enables
continuously variable adjusting of track width.
Each axle is sideward fastened with four screws
that must be slightly unscrewed for changing the
width (the chassis must be lifted from the ground)
and pulled out or pushed into the supporting tube
of wheel axle for a chosen track width.
1
The axle
must be re-tightened with screws which must be
finally secured with a counter nut to prevent the
screws from getting loose later.
9.10
BLOWER
Blower is a constituent part of the sprayer, in which a multiplier with a fan is clamped. There are
nozzle brackets with nozzle inserts screwed on the outside frame (air outlet); however, there is a
protective mesh screwed on the rear, air-inlet side. The blower is designed for producing air, to which
spray agent drops are added. Spraying quality depends on the airflow quality (air amount and speed
without turbulence). The airflow thus enables a quality drop transfer from the nozzle to the desired
place on the plant. All blower versions, also those with a rectifier, are produced with a metal case.
Standard blower
Rectifier with adjustable nozzles
An advantage of the air rectifier is enabling a more even distribution of the air to the left and to the
right sides of spraying, and to the whole height of the habitus. “Air quality” is a great deal better with a
rectifier; therefore spraying with a low water consumption per hectare is possible with the help of a
rectifier, which consequently lowers spraying costs.
Key for adjusting the
blower blades
Screw for
adjusting the
height of nozzle
Summary of Contents for AGP 1000 EN
Page 2: ......
Page 59: ...NOTES ...
