45
Wipe the mounting surface of the filter clean.
Include new filter with rubber gasket which is dipped with oil fully.
Screw on the filter by hand till the hand can not play the role, and then tighten it with wrench.
Loosen drain screw on oil pan with wrench to drain off the oil; then screw on and tighten it.
Wipe clean the oil filler on the cylinder head cover when oiling from this hole so as to prevent from
mixing foreign matters. After filling, cover carefully and then check the oil level after 5-10 minutes.
When start up the engine, check the filter and the screw on oil pan for leakage and then adjust as
required.
When shut down the engine, check the oil level after several minutes and fill if required.
Notice: Be careful that hand is to be scalded by hot oil.
1. Check the oil level frequently. Lack of oil will cause the engine damage which is not guaranteed.
2. Be sure that the used oil is not to be poured to ground, gutter or river, which shall be disposed at
dump area with proper equipment.
