APR600 User Manual
13/02/20
Page 48 of 52
7.6.5.1 Show Battery Info
When fully
charged, the battery info shows ‘
100%
’.
Below the charging indication, the display shows rough es-
timates concerning the remaining operating time in standby
mode (APR600 running but RFID engine is off), here 22
hours, and in continuous read mode, here 7 hours and 10
minutes.
In this example the battery capacity is at 57 percent. The
expected standby time is 12 hours and in continuous read
mode there are 4 hours left.
Bluetooth is activated in this example; this is also included
in the calculations as well as WLAN. So, the shown ex-
pected battery life considers all electric consumers that are
currently active.
Details concerning the battery symbol in status bar are explained in chapter 4.1.2.1.
7.6.5.2 Show Firmware Info
The item ‘
Show Firmware Info
’ displays the readers firm-
ware version plus some additional information like build
date and bootloader version. You should have those infor-
mation available in case of a support request.
7.6.5.3 Show Hardware Info
The ‘
Hardware Info
’ shows the readers serial number and
revisions of printed circuit boards that are built into the de-
vice. You should have those information available as well
in case of a support request.
