APR600 User Manual
13/02/20
Page 26 of 52
7.4 Data
The ‘
Data
’ menu contains items for showing and deleting
data. It is also possible to search an uploaded Database
for a particular entry based on either the input of the VID
or an EID (read transponder), but only if a Database has
been uploaded. If this is not the case, these menu items
are not shown.
7.4.1 Show Data
When the item ‘
Show Data
’ was selected, the device will show a list of all groups which are
present in the memory at the moment. Each entry shows the group name and the number of
records within the group in brackets.
… One group down
… One group up
… Scroll down 6 groups
… Scroll up 6 groups
… Select group
After a group has been selected, it will be opened and all records within this group are shown.
The first display line shows the group name, here: ‘
Group 8
’. The second line shows the record
number (within the current group) plus date and time of reading for the selected record. A scroll
bar on the right side shows the approximate position of the selected record in this group (here it
is the last record).
… One record down
… One record up
… Scroll down 50 records
… Scroll up 50 records
… Select record
… Switch between EID and VID view
If you press
+
simultaneously, the reader will directly switch to the last record within this
group and when
+
are pressed again at the same time, you can switch back to the first
record.
This screenshot shows the same list but instead of the
EID, the VID is shown. Of course, VIDs must be available
on the device, i.e. a Linklist or a Database has to be up-
loaded. If there is no VID available for particular records,
the EIDs will be shown instead.
