30
Two-wheel tractor agria 3600
3. Devices and Operating Elements
Front Weights and Wheel Weights
To improve traction fit front weights and wheel weights.
Mounting Front Weight
Item No. 3228 011
Fitting wheel weights
Item No. 3621 011
Version 2F2R hexago-
nal wheel shaft:
l
Remove drive-wheels.
l
Fit the wheel hubs (1)
with the hexagon shaft
pointing to the wheel.
Before you do this, at-
tach the flange to the
drive wheels using the
long hexagonal screws
(2) [delivered complete
with the wheel weight].
Attach these in pairs and diagonally to the wheel flange (1) from the inside.
l
Attach 2 wheel screws (4) diagonally into the free threaded holes on the wheel
flange. Attach them from the inside.
l
Use 2 long headed screws (7) and washers (6) to screw wheel weights (5)
diagonally onto hexagonal screws (2) fitted from within.
Tighten wheel screws and weight fastening nuts at a torque of 50 Nm.
Version 3F2R wheel flange with dou-
ble end studs:
l
For each wheel, remove 2 wheel nuts
and washers diagonally.
l
Diagonally mount wheel weights onto
double end studs (2) using 2 long
headed screws (7) and washers (6).
Tighten wheel screws and weight fas-
tening nuts at a torque of 50 Nm.
3
3V2R
50 Nm
2V2R
50 Nm
