8
24. Position the flow control mounting bracket (figure 12).
a. Push on flow control arm until it locks in "OFF"
position.
b. Slide flow control mounting bracket along tube
until closure plate in bottom of hopper just closes.
c. Snug the 5/16" lock nuts just enough to hold flow
control mounting bracket in place.
d. Set adjustable stop at "5". Pull flow control arm
against stop. Verify that closure plate has opened
about half way.
e. If closure plate does not open half way, adjust
position of flow control mounting bracket until
closure plate will open about half way at "5" and
will still close when arm is locked in "OFF"
position.
Tighten
the 5/16" lock nuts.
FIGURE 12
27. For most vehicles, assemble the hitch extension
bracket to the holes in the hitch tube shown at the
top
of figure 14. Use two 1/4" x 1-3/4" hex bolts (B) and
1/4" hex lock nuts (F) tightened only finger tight.
Attach the spreader hitch to your vehicle hitch. Check
for interference with the spreader directly behind and
out to both sides of the vehicle. Lift the spreader at
each position to make sure there is no interference
with the spreader's flow control. If there is interfer-
ence with the rear of the vehicle, assemble the hitch
extension bracket as shown at the
bottom
of figure
14.
Tighten
the bolts and nuts when finished.
FIGURE 11
FLOW
CONTROL
ARM
OFF
ON
1
2
3
4
6
7
8
9
10
5
ADJUSTABLE
STOP (S)
(SETTING "5")
ON
OFF
(R) NYLON
WING NUT
OFF
ON
1
2
3
4
6
7
8
9
10
5
(K) 5/16" FLAT
WASHER
(J) NYLON
WASHER
(S) ADJUSTABLE
STOP
(E) 1/4" x 3/4"
CARRIAGE BOLT
FIGURE 14
25. Assemble the hitch bracket to the hitch extension
bracket using two 3/8" x 3/4" hex bolts (C) and 3/8"
hex lock nuts (H). Insert the bolts from the bottom.
See figure 13.
26. Assemble the hitch pin (P) through the hitch bracket
and the hitch extension bracket and secure with the
hair cotter pin (O). See figure 13.
(F) 1/4" HEX
LOCK NUT
(B) 1/4" x 1-3/4"
HEX BOLT
FIGURE 13
(C) 3/8" x 3/4"
HEX BOLT
(H) 3/8" HEX
LOCK NUT
(P) HITCH PIN
(O) 1/8" HAIR
COTTER PIN
ENGLISH
For Agri Fab Discount Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com
Summary of Contents for 45-0329
Page 11: ...11 For Agri Fab Discount Parts Call 606 678 9623 or 606 561 4983 www mymowerparts com...
Page 22: ...22 NOTES For Agri Fab Discount Parts Call 606 678 9623 or 606 561 4983 www mymowerparts com...
Page 23: ...23 NOTES For Agri Fab Discount Parts Call 606 678 9623 or 606 561 4983 www mymowerparts com...
