V06
3-12.2 Reset Configuration Data
Normally, you have this field Disabled. Select Enabled to reset Extended System
Configuration Data (ESCD) when you exit Setup if you have installed a new add-on and the
system reconfiguration has caused such a serious conflict that the operating system can not boot.
The choice Enabled, Disabled
3-12.3 Resource controlled by
The Award Plug and Play BIOS has the capacity to automatically configure all of the boot
and Plug and Play compatible devices. However, this capability means absolutely nothing
unless you are using a Plug and Play operating system such as Windows 95. If you set this field
to “manual” chose specific resources by giving into each of the sub menu that follows this field
(a sub menu is preceded by a
).
The choice: Auto (ESCD), Manual.
3-12.4 IRQ Resources
When resources are controlled manually, assign each system interrupt a type,
depending on the type of device using the interrupt.
IRQ3/4/5/7/9/10/11/12/14/15 assigned to
This item allows you to determine the IRQ assigned to the ISA bus and is not available to any
PCI slot. Legacy ISA for devices compliant with the original PC/AT bus specification, PCI /
ISA PnP for devices compliant with the Plug and Play standard whether designed for PCI or
ISA bus architecture.
The choice: Legacy ISA and PCI/ ISA PnP.
3-12.5 PCI/ VGA Palette Snoop
Leave this field at Disabled.
The choice Enabled Disabled.
3-12.6 Assign IRQ for USB / VGA
This item allows the user to Enable/Disable the Assign IRQ for USB / VGA.
The choice: Enabled, Disabled.