manualshive.com logo in svg

AGP PM-V06, Manual, Page: 38 / 62

Share
Download
AGP PM-V06 Manual Download Page 38

V06 

 

 

 

System 
 

The system will not boot and access to Setup will be denied if the correct 
password is not entered at the prompt. 

Setup 
 

The system will boot, but access to Setup will be denied if the correct password 
is not entered at the prompt. 

 

Note: 

If you need to disable password boot-up, choose Password Settings from 

the main menu, just press <Enter> when you are prompted to enter the 

password. Password will be disabled. Once the password is disabled, the 

system will boot and you can enter Setup freely. 

 

3-7.15    OS Select For DRAM> 64MB

 

Select the operating system that is running with greater than 64MB of RAM on the system. 

The choice: Non-OS, OS2. 

Note:  

Select OS2 only when the OS/2 operation system is installed and the 

system memory is over 64MB, otherwise, choose Non-OS2. 

   

3-7.16  Video BIOS Shadow 

Determines whether video BIOS will be copied to RAM for faster execution. Video Shadow 

will increase the video performance. 

 

Enabled (Default) 

Video shadow is enabled. 

Disabled 

Video shadow is disabled. 

 

3-7.17    C8000-CBFFF / DC000-DFFFF Shadow 

Determine whether the optional ROM will be compiled to RAM for faster execution. 

 

Enabled   

Optional shadow is enabled. 

Disabled (Default) 

Optional shadow is disabled. 

 

Summary of Contents for PM-V06































































Reviews:

No comments