V06
2-1.3 Memory Installation
System Memory Installation Procedures
1 The DIMM slot has 2 notch keys, so the DIMM memory module can only fit in one
direction.
2 Insert the DIMM memory bank vertically into DIMM slot, then press it down placidly and
uniformly.
3 The plastic clip at the side of the DIMM will automatically close.
There are 2 pcs 168 pin DIMM sockets on the mainboard which support Synchronous
DRAM and Registered SDRAM, and it allows you to install system maximum up to 1024MB.
2-1.4 Type
The mainbaord supports 168PIN Synchronous DRAM and Registered SRAM. However,
mixing DRAM and Registered SDRAM is not allowed. Install one type only in your system for
better compatibility.
2-1.5 Speed
This motherboard supports PC-66 PC-100 or PC-133 memory only for high speed operation.
2-1.6 Buffered and non-buffered
Only the non-buffered DIMM can be used in this mainboard. The difference between
buffered and non-buffered DIMM can be identified by the notch position shown above.