5
ELECTRICAL CONNECTION
The network voltage must conform to the voltage indicated on the tool name plate. Under no
circumstances should the tool be used when the power supply cable is damaged. A damaged cable
must be replaced immediately by an authorized Customer Service Center. Do not try to repair the
damaged cable yourself. The use of damaged power cables can lead to an electric shock.
WARNING: Always use the Portable Residual Current Device
(PRCD) also known as a Ground Fault Circuit Interrupter (GFCI)
to reduce the risk of shock hazards. Always position the PRCD
as close as possible to the power source. Test and reset the
PRCD device before each use. Press the “Test” button to test.
Press the “Reset” button to energize the circuit to the machine.
WARNING: Always connect the plug into the wall socket with
a drip loop. If the cable leads downward directly into the wall
socket, any water on the cable could run into the socket, causing a hazard.
Cover
Test Button Reset Button
On Lamp
...... DANGER! Risk of Getting Cut by Sawblade Operate Carefully
.....Warning of general danger
.....read these instructions
....Always wear eye protection
.....Always wear a dust mask.
.....Always wear hearing protection
.....Wear safety-approved hard hat
.....DANGER! Keep hands away from cutting area and the blade.
..do not dispose of electric tools,
accessories and packaging together with household waste material
Summary of Contents for 0.75KW115V
Page 12: ...12 WIRING MOTOR SWITCH WHITE BLACK RED TERMINAL BLOCK CAPACITOR 3 WAY TERMINAL BLOCK ...
Page 13: ...13 ...
Page 16: ...16 ...
