Fit the assembly
into the
fuel pump
housing (12E) and
secure the parts
together using two of
the silvered
JP screws.
Fit the
main gear
(12B) onto the shaft of
the
intake cam cover
(12A) and as shown
attach it with a
DP
screw. Take the fuel
pump assembly and
fit the holes of the
fuel
pump base (12G) over
the corresponding
screw holes of the
cam cover. Holding
it in place, secure the
fuel pump to the cover
using two
AP screws.
Next push the two
pins of the
housing
cover (12M) into the
holes of the fuel pump
housing, then press the
panel (12H) into the
D-shaped hole on the
side of the housing.
STAGE 12: BUILDING THE FUEL PUMP
S T E P 3
S T E P 4
32
32
AGORA
MODELS
Summary of Contents for STEVE MCQUEEN'S ICONIC PORSCHE 917KH Pack 02
Page 13: ...STAGE COMPLETE 13 13 AGORAMODELS PORSCHE 917KH STAGE07 RIGHT SIDEOFENGINEBLOCK ...
Page 22: ...STAGE COMPLETE STAGE 09 ATTACHING THE RIGHT CYLINDER HEAD 22 22 AGORAMODELS PORSCHE 917KH ...
Page 26: ...STAGE COMPLETE STAGE 10 ASSEMBLE AND FIT THE CRANKCASE TOP 26 26 AGORAMODELS PORSCHE 917KH ...
Page 34: ...STAGE 12 BUILDING THE FUEL PUMP STAGE COMPLETE 34 34 AGORAMODELS PORSCHE 917KH ...
