Agora Models STEVE MCQUEEN'S ICONIC PORSCHE 917KH Pack 02, Build Instructions

Page: 2 / 34

2
2
AGORA MODELS
Spare screws are included with each part. Occasionally, you may be instructed to keep spare or
unused screws for a later stage. Keep these spares in a safe place and label them correctly.
Please make sure you don’t mix up the screws. They look quite similar, but the threads do vary slightly.
Using the wrong screws may damage the parts.
When securing parts together using multiple screws, fit each screw loosely to ensure all the parts are
correctly aligned before gently tightening them firmly, but not overtight, in the order in which you
placed them.
The screwdriver can be magnetized by stroking it with a magnet (fridge magnet, etc.) enabling it to
hold the screws and make assembly easier.
If a screw is tight going into a metal part, do not force it as you may shear the head off. Remove it and
put a tiny smear of Vaseline, soap or light oil on the thread. That will lubricate it and make it easier to
drive home.
During the course of this build, you will receive many pieces that you will assemble immediately –
following the instructions in the corresponding stage – and other pieces that you should store safely
to one side, for use in future assembly stages.
Left and Right! When building your Porsche 917KH, the left or right hand side refers to each side as
you are sitting in the car.
!
WARNING: Some parts are assembled using magnets. These magnets can cause serious injury if they
are swallowed. Keep away from children. If you suspect a magnet has been swallowed, seek medical
help straight away.
Advice from the experts