Connect the loose end
of the
oil hose (8C) on
the engine block onto
the lug at the end
of the
exhaust cam
cover (9D) as shown.
If necessary, you can
glue the hose in place
with a small amount
of super glue.
The cylinders and end shields
should look like this once they
have been fitted.
S T E P 5
S T E P 6
Align the cylinder head
assembly with the
right
engine block (7A) as
shown. Carefully fit in place,
ensuring that the lugs from
the two
end shields (9E)
fit into the corresponding
holes and that the screw
holes from the cylinder
head assembly align with
the screw holes in
lower
cylinders (7E) . Attach the
two assemblies together
with two
IM screws.
STAGE 09: ATTACHING THE RIGHT
CYLINDER HEAD
21
21
AGORA
MODELS
Summary of Contents for STEVE MCQUEEN'S ICONIC PORSCHE 917KH Pack 02
Page 13: ...STAGE COMPLETE 13 13 AGORAMODELS PORSCHE 917KH STAGE07 RIGHT SIDEOFENGINEBLOCK ...
Page 22: ...STAGE COMPLETE STAGE 09 ATTACHING THE RIGHT CYLINDER HEAD 22 22 AGORAMODELS PORSCHE 917KH ...
Page 26: ...STAGE COMPLETE STAGE 10 ASSEMBLE AND FIT THE CRANKCASE TOP 26 26 AGORAMODELS PORSCHE 917KH ...
Page 34: ...STAGE 12 BUILDING THE FUEL PUMP STAGE COMPLETE 34 34 AGORAMODELS PORSCHE 917KH ...
