AGM PA-15, Instruction Manual

Page: 4 / 42

4
FOREWORD
The AGM Model PA-15 is the most up to date welding system in the pin and stud
welding industry.
This welding system has been carefully constructed from the finest and most reliable
parts available, with all components being rigidly inspected and tested to assure long and
trouble free performance.
This Initial Contact Capacitor Discharge (CD) welding system requires no flux, inert gas
or arc shields to weld pins or studs.
The PA-15 welding system incorporates features that make it inexpensive to operate and
maintain. It will give excellent service over a long period of time with just ordinary care
and maintenance.
This manual provides adequate information for the operation and maintenance of the
system. If you are in need of additional application information or service, contact your
AGM representative or the factory direct.
LIMITED WARRANTY
No Warranty, including warranty of merchantability, express or implied, is made in
connection with the sale of this machine, except that AGM Industries will repair or
replace defective parts which may develop under normal and proper use of the machine
during a period of ninety (90) days from the date of delivery, provided that the warranty
shall not be valid if the machine has been subjected to misuse or abuse or has not been
installed, adjusted, maintained, operated, or used in accordance with instructions
furnished by AGM Industries, or if pins or studs other than those manufactured by AGM
Industries, even though purchased from sources approved by AGM Industries, are used
with it. Notice of any claim hereunder shall be given by the purchaser to AGM Industries
in writing within five (5) days after the defect shall have been discovered. AGM shall
have no liability for any labor or material charge or shipping cost not expressly
authorized by them in writing; and in this event, their liability shall be limited as in these
conditions set forth.