20
AGM Global Vision
1. If necessary, remove the sacrificial window or objective lens cap.
2. Turn the monocular on.
3.
While looking through the monocular, rotate the objective lens focus completely
counterclockwise.
4. Press the compass onto the objective lens at an angle. Slowly turn the compass counterclockwise
until it is in the vertical position, with the illumination button pointing down (Figure 2-11).
5. Verify that the compass fits securely to the objective lens.
NOTE:
For the compass to fit properly, the O-ring must be correctly placed in the compass.
6. Refer to Paragraph 2.3.6 for compass operation.
2.2.13 INSTALLATION OF THE MAGNIFIER
The 3x or 5x magnifier can be threaded directly into the objective lens. It can also be threaded into
the focus ring adapter and slipped on over the end of the objective lens.
Figures 2-12 and 2-13 illustrate these installation procedures.
MAGNET
FIGURE 2-10. LOCATING THE MAGNET
FIGURE 2-11. COMPASS INSTALLATION
