12
AGM Global Vision
TABLE 2-1. CONTROLS AND INDICATORS
CONTROLS AND
INDICATORS
FUNCTIONS
Power Switch
Controls the monocular and IR source, ON or OFF.
RESET/OFF
Same as system OFF.
Also resets monocular after high light cut-off.
ON
Monocular is activated.
IR/PULL
Turn the knob clockwise to briefly activate the IR
source. For continuous operation of the IR, pull and
turn the knob clockwise from the ON position.
CAUTION:
Do not use excessive force when operating the power switch.
Low Battery Indicator
The low battery indicator will blink on and off when there are fewer
than 30 minutes of battery life remaining. It is visible through the
eyepiece, just outside of the intensified field of view.
IR Source On Indicator
The IR Source On indicator will blink when the IR is activated. It is
visible through the eyepiece just outside of the intensified field of
view.
Gain Control
Adjusts the system gain from a minimum value of approximately 25
to a maximum value greater than 3,000.
Objective Focus
Focuses the objective lens and adjusts for the sharpest image of
the viewed object or environment.
Diopter Adjustment
Focuses the eyepiece lens for use without glasses. Adjusts for the
sharpest image of the intensifier screen.
Eye Relief Adjustment
Adjusts the distance between your eye and the monocular.
Latch
The latch is used to separate the monocular from the head mount/
helmet mount adapter.
Battery Polarity
Indicators
This feature is engraved into the battery housing and shows the
proper orientation of the battery. Some versions have a bubble
molded into the top of the battery house that indicates polarity.
NOTE:
Both the low battery and IR active Indicators are visible in the eyepiece lens.
