AGM Global Vision ASP, User Manual

Page: 21 / 32

21 ASP
USER MANUAL
A. Adjust the brightness of the display for your comfort.
Push buttons (1) and (2) to increase/ decrease the display brightness by one level at a time
until you reach your desired brightness level.
B. Use FFC (Flat Field Correction) to improve image quality.
Push buttons (1) and (2) simultaneously to start manual Flat Field Correction.
If necessary, interrupt the automatic process by pushing the OK button (3) on the control
panel during the 5-second countdown, which will appear at the bottom of the display.
C. Use digital zoom to magnify the central area of the displayed scene.
Momentarily push the zoom control button (2) to slowly magnify into the displayed scene.
The 2x, 4x, 8x symbols (maximum zoom factor is dependent of model) will appear in the
bottom part of the display.
NOTE:
Digital zoom allows distant objects to appear larger; however, the resolution will be compromised.
D. Use the image palettes for optimal visualization of temperature changes in the scene.
Hold down the palette control button (2) to scroll through available palettes. The palette name
will appear in the top part of the display.
E. Turns reticle ON/ OFF.
Push and hold button (2) to turn reticle ON or OFF.
F. Select the color of the reticle.
Momentarily push the reticle color control button (4) to select among black, white, red, and
cyan.
G. Select a reticle pattern.
Push and hold button (4) to select from a choice of reticle patterns: Dot 4 MOA, Line Dot,
Cross Center Dot, Cross, Crosshair.
H. Adjust the necessary adjustment using the MAIN MENU (See Part 2.2.2).
NOTE:
After configuration is complete, select EXIT on the MAIN MENU and push the OK button to leave
the MAIN MENU. All settings will be saved.
7. To operate the Asp with wireless remote control, turn the operation switch to the STB position
(Standby). After it the remote control button can activate/ deactivate the device in two ways:
1) To turn the device on, press the remote control button once, to turn it off – press the button
again.
2) To operate the device in short-time activation mode (see note below), press and hold the
remote control button down for 1.5+ seconds. Release the remote control button to deactivate
the device.
CAUTION:
DO NOT leave the equipment activated when not in use.